5 Tips to Try When your Apple iPad is Dead


The battery life on the iPad is excellent. On a full charge, Apple promises you may use it for up to 10 hours. However, like time and money, there is no such thing as too much battery life. This is especially true when your iPad’s battery is low, and you need to accomplish anything on it. There are a few things you can do to avoid running out of power at a critical moment. The suggestions listed below should not be employed regularly; for example, you would not want to go without an internet connection in most instances, but they are helpful when you need to extend the battery life of your iPad.

IPad Screen Death can be caused by various reasons, such as physical damage to the device. This bug occurs with the new iOS update or modifying software restrictions by using kernel patches. This is a common problem that can take you to the wall when getting it fixed, especially if you don’t know what to do.

Do not worry! We’ve put together some easy ways to help you fix the iPad white screen before taking it to the repair shop for iPad fixing service. We recommend that you try them one by one and find the best one for you.

5 Ways To Fix iPad Stuck On White Screen

From holding down two buttons to downloading software, here are five ways you can fix your iPad stuck on a white screen. Look at them.

Way 1: Hard reset iPad
Way 2: 3 Button Tricks To Fix iPad White Screen
Way 3: Restore iPad from iTunes Backup
Way 4: fix iPad white screen without data loss
Way 5: Restore iPad from DFU Mode

Here are the 5 Tips to Try When your Apple iPad is Dead


1. Hard Reset iPad

The iPad getting stuck on a white screen can often be solved by just pressing two basic buttons.

For a few seconds, hold down the Home and Sleep/Wake buttons at the same time until the Apple logo appears on the screen. Then, your iPad will restart automatically and resume regular operation.

2. 3 Button Trick To Fix iPad White Screen

If your iPad screen is still white, you can still try something else before you get technical.

Press the Home button, the volume up button, and the power button and again wait for the Apple logo to appear on the screen. Your iPad will restart, and you can continue using it like nothing.



3. Restore iPad From iTunes Using Recovery Mode

Still not working? Well, there is another way to fix your iPad or iPad 2 white screen problem. Follow the steps to see how to restore your device from iTunes using recovery mode.

Note: iTunes restore erases all data on the device; you can free backup your iPhone beforehand.

Connect your iPad to your computer and open iTunes on your PC.
For at least ten seconds, press the home and sleep/wake buttons simultaneously.

Stop holding the Sleep / Wake button, but keep pressing the Home button until a message appears on your computer screen. It should say, “iTunes has detected an iPad in recovery mode. You must restore this iPad before it can be used with iTunes.”

white screen on iPad
You need to press ‘OK’ followed by ‘Restore’ to start restoring your iPad.

4. Fix iPad White Screen Without Data Loss

If nothing has worked so far, you should consider using a tool like ReiBoot to repair the iPad system and fix the white screen without data loss. There are tools can help you improve your iPad without having to restore it. It can also help with iOS issues such as your iPhone being stuck in recovery mode, not being detected in iTunes, or the terrible white and blue screen. Download the program and follow the steps below to fix the iPad white screen of death quickly.

Launch tool and connect your iPad to the computer. Once the device is detected, click “Start” on the main interface. Then, click “Repair Now” to begin.

After the firmware has been successfully downloaded, click “Start Standard Repair” and repair the iPad system according to the on-screen instructions. Your device will reboot normally after the operation is finished.

After the firmware has been successfully downloaded, click “Start Standard Repair” and repair the iPad system according to the on-screen instructions. Your device will reboot normally after the operation is finished.



5. Restore iPad From DFU Mode

Finally, if everything else fails, you can fix the white screen of death by putting the iPad into DFU mode.

DFU stands for Device Firmware Update and allows you to change and select the firmware you want to install on your device. Here are the steps you need to follow to restore your iPad from this mode:

  • First, connect your iPad to your computer via USB and launch iTunes.
  • Next, turn off your device and press and hold the Home button and the Power button for ten seconds.
  • After ten seconds, continue to hold down the Home button but release the Power button. If a “Connect to iTunes” prompt appears, you must restart the process. If the iPad screen is black, you have successfully entered DFU mode.
  • iTunes will detect your iPad and allow you to restore it.
  • Reboot iPad stuck on a white screen.
  • Now you will enter the firmware download screen. The software will display the latest firmware version for your iPad. Choose a save path and click “Download”.

Some Other Tricks That Are Worth Trying Before The Things Mentioned Above.

1. Turn off Wi-Fi
Your iPad’s Wi-Fi connection drains your battery, whether you’re using it or not connected to the Internet. That’s because your iPad constantly searches for networks. So if you’re offline and don’t need to use the internet for a while, you can conserve iPad battery life by turning off Wi-Fi. That’s how:

Tap the Settings app on the iPad home screen.
IPad settings icon
Tap Wi-Fi on the left panel.
Wi-Fi Settings on iPad
To disable the Wi-Fi connection, move the Wi-Fi slider to off / white.
Wi-Fi on the iPad should be turned off.
4G mobile data should be turned off.

A 4G LTE broadband connection is included in several iPad models (or a 3G connection on older models). However, when 4G is enabled on your iPad with a cellular connection, the battery drains whether you are using the Internet or not. Therefore, turn off 4G if you don’t need to connect to the internet or if you want to save more battery than you need. To do so, follow these steps:

Tap Settings on the iPad home screen.
Touch Cellular on the left panel.
Move the Mobile data slider to off / white to prevent mobile connections.

2. Turn off Bluetooth

You probably already have the idea that wireless networks of any kind deplete your battery life. It’s true. So another way to save battery is to turn off Bluetooth. The Bluetooth network connects devices such as keyboards, speakers, and headphones to the iPad. If you’re not using any of that and don’t plan on doing it anytime soon, turn off Bluetooth. That’s how:

Tap Settings on the iPad home screen.
Tap Bluetooth on the left panel
Bluetooth settings on iPad
Move the Bluetooth slider to off / white.
Turn off iPad with Bluetooth.

3. An airDrop should be turned off.

The iPad also has AirDrop, which is a wireless networking feature. Transfer files wirelessly from one Mac or iOS device to another. It’s beneficial, but even when it’s not in use, it might deplete your battery. Unless you’re about to use it, keep it off. To disable AirDrop, follow these steps.

Slide your finger down the screen, starting in the upper right corner, to open Control Center on iPad with iOS 12. Then, swipe up from the bottom of the screen in prior iOS versions.
Tap the AirDrop icon, which is immediate to the right of the aeroplane mode icon.
Turn off the Airdrop mode.

These are just a few tricks and ways. If you are still unable to fix your iPad, contact us, and we will fix it immediately.

1 Year Warranty
All iFix Smartphones Repairs Are Backed by One Year Warranty.

To lodge a warranty claim please email including your name, phone
model and issue with the phone.