Do you have to have your phone at the right angle for it to charge? This may be a sign that there is dirt living in the charging port space. Dirt can accumulate anywhere and on everything from dead skin cells to dust and pet hair. All those tiny particles get trapped in your charging port and prevent the connections – the trim gold lines on the head of your charger and inside the port – from making contact. THAT IS TO SAY. Your phone won’t charge!
Why is it that a phone won’t charge?
The issue manifests itself in several forms. Your phone will either not charge at all when plugged in, or it will charge very slowly (sometimes a little faster than it discharges). However, because this is a common problem, here are some answers. Most charging issues are caused by your USB cable, charger, or even the port itself.
The charging cable comes out of the charging port.
It seems like no matter how hard you try; your charger flatly refuses to stay plugged in. You can’t even get it fully into the port anymore! This is a more advanced stage of the “right angle” dilemma because all the dirt in your charging port prevents the charger from making a connection. Time to clean up and start looking for iPhone charging port repair immediately!
Listed below are the 5 Signs your iPhone Needs a Charger Port Replacement
- Loads slowly
You may have a flash charger, but it seems like your phone has been taking forever to charge lately. You’re sitting there, watching, waiting for it to reach an acceptable percentage so you can get on with your day. Nobody has time for that. This is a classic sign of a loading port in need of a spring cleaning!
iPhone users are prone to charger port rust. Corrosion frequently occurs in water and air; a metal object must have both water and air to rust.
When corrosion starts, it starts around the metal object and weakens the exposed section first. When the connection breaks down, the overall quantity of power delivered to the receiver may not be enough to power a phone, or the current may be too low to simulate a fast charging process.
The corrosion process takes a long period and occurs silently, so it is not easy to tell if an iPhone is going through the corrosion process.
Metal is reported to be present in the iPhone charger port. Water can enter the port by accident due to spills or sweat that collects in our pockets while moving during our regular routines. Corrosion of an iPhone can be caused by a variety of factors, including:
- Sweat accumulation, either in your pocket or during exercising.
- Water or water products should not be handled carelessly near the phone.
- Water collection during a trip to the beach, skiing, or other wet activities.
- Temporarily holding the phone in your mouth or with wet hands.
- Dust, dirt and debris
Dust is inevitable; It appears daily through our daily tasks, regardless of whether we are in the office driving. Dust particles can be transported through the air; therefore, they can quickly contact our phone irrespective of storing it.
Minuscule particles, such as dust, dirt, or debris specks can permeate the phone when they approach its small ports, regardless of their source. If they get stuck in the charger porthole, they can cause a lot of damage to an iPhone, including connectivity troubles.
Dust, dirt, and debris, on the other hand, do not harm the phone right away; once these particles enter the charger porthole, they should gradually pile up until the connection between the charger port and the cable begins to break. However, the process takes time; days or months may pass before the particles’ impacts are visible.
Some of our daily activities can collect dust, dirt, and debris that can enter an iPhone’s charging port, such as:
- It is working in environments that often host dust, dirt, and debris, such as construction sites, workshops, or factories.
- Outdoor activities, such as sports or camping
- Working in the garage
- General house cleaning
- Broken charger port
A broken port is one of the most complex iPhone charger port problems. A faulty port occurs mainly due to external forces; a charging port cannot be damaged without an external application.
A faulty port is difficult to repair because it requires experienced engineers who will open the phone and replace the port. Furthermore, unlike other charging port difficulties, which can be solved by improvising, such as cleaning it or applying a few tools, the port needs to be changed to work properly.
The port can be damaged in one of two ways: it can be physically broken or disconnected from the root connections. This can happen due to forced insertion while entering the cable into the port, which is why it’s essential to treat the port with care while inserting a charger or data cable.
Because this form of damage requires external forces, most port breakage is caused by user error. The following are some of the causes of a broken iPhone charger port:
- Rough handling of the charger port
- Using an incompatible power cord
- Using a bent power or data cable
- Inserting sharp objects into the charger ports
- Improper way of using the port cleaning devices
- Bent metal connector
A bent metal strip on the charger port is a common cause of problems with an iPhone’s charger connector. When a charger or data cable is inserted, the metal in the port tends to flex easily. The metals from the port and the motherboard are bonded together to make the port work. Each insertion method establishes a barrier between the port and the motherboard.
Therefore, regardless of when the iPhone was purchased, the phone will start to show signs of damage when the accessory weakens. An example is a slow loading process.
Can you fix an iPhone charger port?
Yes! With or without tension, an iPhone charger port can be repaired. An iPhone charger port works similarly to other devices in that it opens and accepts any type of direct input. A quick and uncomplicated repair technique is necessary if the problem is caused by external causes such as stone obstruction, dirt, sand, debris, and so on.
If your battery isn’t charging correctly, don’t immediately assume that your phone’s charger or battery is broken. Based on personal experience, the problem and solution may be much simpler than you think.